Tork Craft | Annular Hole Cutter HSS 32 X 55mm Broach Slugger Bit Accud_Micrometer These fittings are most commonly

These fittings are most commonly used where it is necessary to bring a hose from a power tool or a smaller stationary machine such as a Belt Sander

Depth stop 2 607 002 585

Working edges of the blades are lapped which further enhances accuracy

a radiused leather honing wheel

Blue-Kote™ Screws provide rust-resistance up to 400% greater than zinc-plated screws and work with pressure-treated material

Tork Craft | Annular Hole Cutter HSS 32 X 55mm Broach Slugger Bit Accud_Micrometer These fittings are most commonlyAnnular Hole Cutter HSS 32 X 55mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these