Tork Craft | Annular Hole Cutter HSS 48 X 55mm Broach Slugger Bit Groz_Clamp Rare earth magnets are twice

Rare earth magnets are twice as strong for ultimate holding power and stability

Cut channels for pipes or cables using this ball end bit

optimizing the suction on every particle

because of the excellent surface quality

5" x 7" (241X178mm)

Tork Craft | Annular Hole Cutter HSS 48 X 55mm Broach Slugger Bit Groz_Clamp Rare earth magnets are twiceAnnular Hole Cutter HSS 48 X 55mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these