Pro-Tech | Router Bit Plunge Cutting Ball 1/2" X 1/2" 1/4" Shank Brand_Milescraft • 1x 10" • Water

• 1x 10" • Water Pump

Power Switch 230V for In-Line/Bench Top/Floor Standing Router Tables

Spline Bits 30mm & 75mm Long: M5 – M6 – M8 – M10 – M12

Morse Taper drill sleeves are used as a reduction or sizing up of Morse taper tooling

longer open assembly time and lower application temperature

Pro-Tech | Router Bit Plunge Cutting Ball 1/2" X 1/2" 1/4" Shank Brand_Milescraft • 1x 10" • WaterPlunge Cutting Ball Bit Cut channels for pipes or cables using the ball end bit. The profile requires the cut to be made in a single pass. To reduce stress on the bit, cut an initial groove using a straight bit matching the diameter dimension of the ball end bit. Cut channels for pipes or cables using this ball end bit. Uses include: 2 Flute Industrial quality Carbide tipped To reduce stress on the bit, cut an initial groove using a straight bit