Tork Craft | Chassis Screw Sheet Metal Punch 32mm Cordless_Drill Square and Ruler

Square and Ruler

joists and live wires/conductors in walls

hammer strike applications

0Ah Pad Diameter

payload 25kg Outside length 444mm Outside width 329

Tork Craft | Chassis Screw Sheet Metal Punch 32mm Cordless_Drill Square and RulerSheet Metal Punch The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a hole through sheet metal. It is a very simple tool that consists of a punch, die and screw. To set up the punch, first drill a pilot hole into a piece of sheet metal with a step drill bit, place the die over the draw stud before inserting the stud through the pilot hole. The punch is then threaded onto the tip of the draw stud and brought close to the sheet