Tork Craft | Plug/Tenon Dowel Cutter 20mm Bosch_Impact Drill This needs to be removed

This needs to be removed by lightly sanding with a fine abrasive paper

Cutting plastic-based materials such as phenolic-resin-bonded fibres and fabrics

Stepless speed preselection

New reversing system allows: Extended service life of carbon brush

Hook and loop type abrasive paper can be used

Tork Craft | Plug/Tenon Dowel Cutter 20mm Bosch_Impact Drill This needs to be removedPlug Tenon Dowel Cutter A plug cutter is used to make a timber plug to hide a drilled hole INSIDE DIAMETER: 20mm MATERIAL: Hardened steel with a shear angle design for smooth and easy cutting Application: There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged The plug cutter is measured on the inside diameter Always make sure that the hole is drilled to correspond to the correct plug cutter